Filter
Top Products
What you Can Configure
Setting up your Monitor 3-5
Setting up your
Monitor
What you Can Configure
Changes and adjustments you make to the settings in Monitor Setup
screens remain active while the system is switched on. With the exception
of changes to the date and time, all settings revert back to their default
settings (factory defaults or user defaults) if the system is switched off for
longer than 60 seconds. The settings for the date and time are stored by
the system when it is switched off.
Note—If necessary, these default settings can also be changed. This is
done in a special configuration mode, either by your biomedical
engineering department or the Philips service engineer. See the
““Changing Default Settings and Patient Category” on page 3-44 for more
details.