Polycom 6000 Network Router User Manual


 
NetEngine IAD User Guide
WAN Configuration 102
Quick Con-
figuration
The 6300 contains a number of predefined configurations for physical
connections and PVCs.
To use one of the predefined configurations:
1. On the Main menu, type 5 to select Configure WAN.
2. The IAD displays the WAN Configuration menu.
Figure 4–66. WAN Configuration Menu
Type 0 to select Quick Configuration.
3. The IAD displays the Quick Configuration menu.
Figure 4–67. Quick Configuration Menu
4. Type the option corresponding to the DSLAM to which the 6300 is
connected.
5. The 6300 automatically resets.
6. To continue configuration, log back on to the 6300.
LAN LINK LAN ACT WAN LINK VOICEPOWER
6300
The Quick Configuration option only displays on the
NetEngine 6300.
*****************************************
* WAN Configuration menu *
*****************************************
Configuring SDSL
0. Quick Configuration
1. Configure Datalink Protocol
2. Configure Physical Interface
*****************************************
Quick Configuration
*****************************************
** System will reset after changing configuration **
Current configuration:
Differs from listed configurations
1. Lucent Stinger (Conexant Autobaud, Payload
Scrambling)
2. Nokia (Auto Cycle)
3. Coppermountain (Auto Sense)
4. Paradyne (Unframed 784kbps, Payload Scrambling)
5. AccessLan CPE
6. ATM (Unframed, 1152kbps fixed)
7. Frame Relay (784kbps fixed)