Polycom 6000 Network Router User Manual


 
NetEngine IAD User Guide
Command Line Interface 255
set wan
datalink
Description. Sets the datalink protocol to Frame Relay or ATM. If you
don’t enter optional parameters, it finds the first available slot, interface
and port.
set wan datalink <framerelay | atm> (slot) (interface)
(port)
framerelay | atm
Keyword identifying datalink protocol.
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)
set wan
framerelay
Description. Sets the Frame Relay DLCI number and encapsulation type
to RFC1490 or RFC1483.. If you do not enter any optional parameters, it
finds the first available slot, interface, and port.
set wan framerelay dlci <dlci number> <1490 | 1483>
(slot) (interface) (port)
dlci number
DLCI value (16 - 1023—default is 32 for data and 33 for voice)
1490 | 1483
Encapsulation keyword
slot
Slot number (1 to 7)
interface
Keyword identifying the interface: ethernet | adsl | xdsl | sdsl
port
Port number (1 to 8)