Polycom 6000 Network Router User Manual


 
NetEngine IAD User Guide
Introduction 5
NetEngine
7000 IAD
Family
The Verilink NetEngine 7000 IAD family provides a highly
interoperable, cost-effective broadband solution for voice and high-speed
data integration that is compatible with industry-leading DSLAM and Voice
Gateway manufacturers. These IADs prioritize voice packets and
dynamically allocate bandwidth between voice and data services.
Features
Interoperable with DSLAMs based on Alcatel, Texas Instruments,
MetaLink, and Globespan chip sets. These include Lucent Stinger/
TNT, Nokia Speedlink System, Promatory IMAS, AccessLan
PacketLoop, Accelerated Networks AN-3200, Coppermountain
CopperEdge, and Paradyne GranDSLAM DSLAMs, for example.
Seamless voice and high-speed data integration over xDSL or T1/ITE1
Supports data rates from 144 Kbps to 2.3 Mbps and customer premise
interfaces including POTS, 10/100BaseT Ethernet
Compatible with WAN protocols including ATM and Frame Relay
RJ21X POTS interface with Loop Start or Ground Start
Universal Serial Interface supports V.35 and EIA-530
Dynamic and static IP routing and bridging capabilities
Firewall support via IP filtering
DHCP and NAT to support IP address management
Management capabilities including Telnet, SNMP and TFTP
IADs in the 7000 family are characterized by different WAN interfaces and
different voice capacity:
NetEngine 7216 IAD—provides WAN access over T1/E1, and
telephone support for 16 voice ports via RJ21X connector.
NetEngine 7216c IAD—provides WAN access over channelized T1,
and telephone support for 16 voice ports via RJ21X connector.
NetEngine 7316 IAD—provides WAN access over SDSL, and
telephone support for 16 voice ports via RJ21X connector.
Physical and electrical specifications for each IAD are listed in Appendix
C, NetEngine IAD Specifications on page 279.
Front Panel Power and Status Indicators
The front panel of the IAD contains several LEDs. These LEDs provide
general information about the operational status of the IAD.