Polycom 6000 Network Router User Manual


 
NetEngine IAD User Guide
Troubleshooting and Diagnostics 269
The table following lists the IAD provisioning parameters on the voice
gateway that identifies the IAD and affects its performance. Verify these
parameters when troubleshooting the IAD.
Table 14–2.IAD Provisioning Parameters
Parameter Description
ID Identification number of the IAD (read only)
Serial Number IAD serial number (read only). Same as MAC
Address
Profile Name IAD profile name
Interface Group Identifies the Interface Group that will deliver
the subscriber’s calls.
ATM Protection Group ATM Protection Group to which the IAD is
assigned.
VPI Virtual Path Identifier that identifies the
subscriber-specific logical path between the
voice gateway and the ATM network.
VCI Virtual Circuit Identifier that identifies the
subscriber-specific virtual circuit between the
voice gateway and the ATM network (VCI must
be specific; between 32 and 1023).
Transport ATM, or Frame Relay
Signalling Loop Start or Ground Start
Compression No compression, 32k, or 16k
Echo Cancellation On or off
Admin Service state of IAD: locked or unlocked
Operational State of IAD (read only)