Filter
Top Products
NetEngine IAD User Guide
This chapter describes the steps to install, connect, and set the IP address
of the NetEngine IAD. It introduces the menu interface and describes how
to perform basic configuration for common LAN and WAN environments. It
also describes basic operations—resetting the IAD, and logging off.
In many cases, all the information you need to get an IAD up and running
in a customer’s premises is contained in this single chapter.
This chapter contains the following topics:
Unpacking the IAD (page 10)
Installing the IAD (page 10)
Connecting via Terminal Emulator (page 11)
Resetting the IAD (page 10)
Powering up the IAD (page 12)
Logging on to the IAD (page 12)
Setting the Ethernet port IP address (page 13)
Connecting via Telnet (page 16)
Basic IAD configuration (page 20)
Connecting the LAN, WAN, USI and Telephones (page 20)
Confirming proper setup (page 22)
In most installations, you’ll proceed through these topics in order. If your
situation varies, complete information on installation, connection,
configuration and troubleshooting is contained in the reference chapters
following this chapter.
2. Quick Start Guide
NOTE
When the IAD prompts you for input, the current value is
displayed in parentheses. To conveniently accept the current
value, just press Enter.