Polycom 6000 Network Router User Manual


 
NetEngine IAD User Guide
Troubleshooting and Diagnostics 266
ISDN-BRI
Diagnostics
Type B to perform BRI Diagnostics.
The IAD displays the BRI Diagnostics menu:
Figure 14–4. BRI Diagnostics Menu
Before conducting any test or enabling an option, type O to select the BRI
line to on which to operate (1-4).
Next, perform the test or enable/disable options by typing the option.
When testing is complete, type 8 to disable all test modes.
LAN LINK LAN ACT WAN LINK VOICEPOWER
6104i
6504i
The BRI diagnostics menu for ISDN testing is available on the
two ISDN-based IADS; 6104i and 6504i.
************************************************
BRI Diagnostics Menu
***********************************************
0. Select BRI Line
1. Send D Channel Test Pattern
2. Enable Internal Digital Loop
3. Enable Internal Analog Loop
5. Enable Remote Loop
6. Enable SSP
7. Enable SCP
8. Disable All Test Modes
9. Send B1 Channel Test Pattern
A. Send B2 Channel Test Pattern
B. Enable/Disable BRI L1 debug message
C. Enable/Disable BRI Dch debug message
D. Disable BRI PS
E. Enable BRI PS
F. Activate L1
G. Deactivate L1
M. Manufacture Loop Back Test
N. Burning Loop Back Test