Filter
Top Products
NetEngine IAD User Guide
Voice Path Configuration 154
Restarting an Endpoint
Type 4 to reset the connection between the Voice Port phone and the
MGCP voice gateway.
You use this option if one side of the link incorrectly identifies a call as up
and the other side thinks the call as down.
To reset the connection, type the number of the port and press Enter.
Configuring Default Packet Size
1. Type P to configure the packet size (default 5.5 ms).
2. The IAD displays the following prompt:
Enter packet size in ms [5.5]>
Type the packet size value and press Enter.
3. The IAD saves the new packet size and displays the menu.
4. Press Escape to return to the MGCP menu and continue with other
voice path configuration.
5. Reset the IAD (page 15) when you finish voice path configuration.