Filter
Top Products
6 – Removal/Replacement
CPU Module
6-6 59043-06 A
0
8. Load the image file on the switch. Move to the directory that contains the
firmware image file and open an FTP session. When prompted, enter the
account name (images) and password (images). Enter the Put command
and specify the name of the image file.
ftp 10.0.0.1
User: images
Password: images
ftp> binary
ftp> put image_file
ftp> bye
9. Unpack the image file. Press and hold the Maintenance button for 2-4
seconds to place the switch in maintenance mode. Open a Telnet session
and log in with the account name “prom” and password “prom”.
Telnet 10.0.0.1
Sanbox2 login: prom
Password: prom
10. Select option 1 from the maintenance menu. When prompted for a file name
enter the firmware image file name. After the unpacking is complete, select
option 7 to reset the switch.
0) Exit
1) Image Unpack
2) Reset Network Config
3) Reset User Accounts to Default
4) Copy Log Files
5) Remove Switch Config
6) Remake Filesystem
7) Reset Switch
Option:1
Image filename: image_file
Unpacking ’filename’, please wait...
Unpackage successful.
0) Exit
1) Image Unpack
2) Reset Network Config
3) Reset User Accounts to Default
4) Copy Log Files
5) Remove Switch Config
6) Remake Filesystem
7) Reset Switch
Option:7