Filter
Top Products
6 – Removal/Replacement
Fans
6-20 59043-06 A
0
6.6.2
Installing a Fan
To install a fan, do the following:
1. Confirm that the new fan has the same air flow direction as the old fan. Each
fan has a part number label indicating the air flow direction as shown in
Figure 6-9.
Figure 6-9. Installing a Fan
2. Slide the fan into the bay until it is firmly seated and fasten the screws. A fan
will fit in any bay.
3. Confirm the fan status. Do one of the following:
Open a Telnet session and enter the Show Chassis command to
display the operational status of the fans. Refer to the ”Show
Command” on page B-62.
Observe the fan status in the Switch data window of the SANsurfer
Switch Manager topology display. Refer to the SANbox2-64 Switch
Management User’s Guide.
Part Number Label