Filter
Top Products
B – Command Line Interface
Show Command
B-62 59043-06 A
0
Show Command
Displays fabric, switch, and port operational information.
Authority None
Syntax show
about
alarm [option]
blade
broadcast
chassis
config [option]
domains
donor
fabric
fdmi [port_wwn]
interface
log [option]
lsdb
mem [count]
ns [option]
pagebreak
panel
perf [option]
port [port_number]
post log
setup [option]
slot [slot_number]
steering [domain_id]
support
switch
topology
users
version
Keywords about
Displays an introductory set of information about operational attributes of the
switch. This keyword is equivalent to the Version keyword.
alarm [option]
Displays the alarm log and session display setting. If you omit [option], the
command displays the last 200 alarm entries. The alarm log is cleared when the
switch is reset or power cycled. [option] has the following value:
setting
Displays the status of the parameter that controls the display of alarms in the
session output stream. This parameter is set using the Set Alarm command.