Filter
Top Products
2 – General Description
Serial Port
59043-06 A 2-11
0
2.5
Serial Port
The SANbox2-64 switch is equipped with an RS-232 serial port for maintenance
purposes. The serial port location is shown in Figure 2-8. You can manage the
switch through the serial port using the CLI.
Figure 2-8. Serial Port and Pin Identification
The serial port connector requires a null-modem F/F DB9 cable. The pins on the
switch RS-232 connector are shown in Figure 2-8 and identified in Table 2-1.
Refer to “Connect the Workstation to the Switch” on page 4-7 for information
about connecting the management workstation through the serial port.
Table 2-1. Serial Port Pin Identification
Pin Number Description
1 Carrier Detect (DCD)
2 Receive Data (RxD)
3 Transmit Data (TxD)
4 Data Terminal Ready (DTR)
5 Signal Ground (GND)
6 Data Set Ready (DSR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
9 Ring Indicator (RI)
Serial Port
1
5
6
9