Filter
Top Products
B – Command Line Interface
Show Config Command
59043-06 A B-79
0
Show Config Command
Displays switch, I/O blade, port, alarm threshold, and zoning for the current
configuration.
Authority None
Syntax show config
blade [slot_number]
port [port_number]
switch
threshold
zoning
Keywords blade [slot_number]
Displays configuration parameters for the I/O blade that occupies the slot given by
[slot_number]. If you omit [slot_number], the configuration parameters for all I/O
blades are displayed.
port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples The following is an example of the Show Config Port command:
SANbox2 #> show config port 3
Port Number: 3
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port3
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False