Filter
Top Products
59043-06 A 4-1
Section 4
Installation
This section describes how to install and configure the SANbox2-64 switch. It also
describes how to load new firmware and how to recover a disabled switch.
4.1
Site Requirements
Consider the following items when installing a SANbox2-64 switch:
Fabric Management Workstation
Switch Power Requirements
Environmental Conditions
4.1.1
Fabric Management Workstation
The requirements for fabric management workstations running SANsurfer Switch
Manager are described in Table 4-1:
Telnet workstations require an RJ-45 Ethernet port or an RS-232 serial port and
an operating system with a Telnet client.
4.1.2
Switch Power Requirements
Power requirements are as 11.5 Amps at 120 VAC or 7.5 Amps at 240 VAC.
Table 4-1. Management Workstation Requirements
Operating System
Windows® NT 4.0/2000/2003
Linux® 7.2 Red Hat®, Gnome™ 1.4
Solaris™ 2.8/2.9, CDE
Memory 256 MB or more
Disk Space 150 MB per installation
Processor 500 MHz or faster
Hardware
CD-ROM drive,
RJ-45 Ethernet port, RS-232 serial port (optional)
Internet Browser Microsoft® Internet Explorer® 5.0 or later
Netscape Navigator® 4.72 and later
Mozilla™ 1.02 and later