Filter
Top Products
B – Command Line Interface
Show Command
B-68 59043-06 A
0
switch
Displays switch operational information.Table B-16 describes the switch
operational parameters.
Table B-16. Switch Operational Parameters
Parameter Description
SymbolicName Descriptive name for the switch
SwitchWWN Switch world wide name
SwitchType Switch model
BootVersion PROM boot version
CreditPool Number of port buffer credits available
to recipient ports
DomainID Switch domain ID
FirstPortAddress FC address of switch port 0
FlashSize - MBytes Size of the flash memory in megabytes
LogLevel Event severity level used to record
events in the event log
MaxPorts Number of ports available on the switch
NumberOfResets Number of times the switch has been
reset over its service life
ReasonForLastReset Action that caused the last reset
ActiveImageVersion - build date Active firmware image version and build
date.
PendingImageVersion - build date Firmware image version and build date
that is pending. This image will become
active at the next reset or power cycle.
ActiveConfiguration Name of the switch configuration that is
in use.
AdminState Switch administrative state
AdminModeActive Admin session status
BeaconOnStatus Beacon status as set by the Set Beacon
command.
OperationalState Switch operational state