Filter
Top Products
154
Editing Songs
Timing (Quantize Timing)
This specifies how much a note will move toward the timing
interval of the template you pick. At a setting of 100%, the
note will be perfectly timed with the template. At a setting of
0%, the note will not move at all.
Range Min, Range Max
Specifies the range of note numbers to be quantized.
For example, if you want to quantize the range between C3 and C4,
set “Note Min” to “C3,” and set “Note Max” to “C4.”
You can also specify the key range by pressing keys on the
keyboard.
MIDI Channel
Specifies the MIDI channel(s) of the notes to be quantized.
If you wish to quantize all notes, set this parameter to “ALL.” When
quantizing only the notes of a specific MIDI channel, select that channel.
Value:
ALL, 1–16
Erasing Unwanted Performance
Data (Erase)
This function erases all the sequencer data inside the specified area.
As the erased data is replaced by rests, the original measures will
remain.
fig.11-15_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 151)
Track / Pattern
Specifies the track(s) or pattern that is to be erased.
Value
ALL:
Phrase tracks 1–16, the beat track, and the tempo track
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
PTN001–PTN100:
The specified pattern
Measure, For (Edit Range)
Specifies the range of measures that are to be erased. If you set “For”
to “ALL,” all measures will be specified.
Status
Selects the type of data to be erased.
Value
ALL:
All types of sequencer data
NOTE:
Note
P.AFT:
Polyphonic Aftertouch
C.C:
Controller numbers
PROG:
Program numbers
C.AFT:
Channel Aftertouch
BEND:
Pitch Bend
EXC:
System Exclusive messages
Tune:
Tune Request
PTN:
Pattern Call Message data
If the Track parameter is set to “TEMPO,” the Status parameter
will not be available.
Preview Function
The Preview function allows you to hear how quantizing will
work while you are still setting Quantize parameters (before
you execute operation). This is called the
Preview function. If
you modify parameter values during preview playback, the
next preview playback will include those latest value changes.
Try various parameter settings to find the one that works best.
Pattern Call events assigned to a phrase track or muted
phrase tracks cannot be previewed.
Pressing [PLAY] when the Track Edit (Quantize) window is
displayed selects Preview mode. The two measures from the
current location of the song will play back repeatedly. The preview
start location can also be specified by pressing [FWD] or [BWD]. To
exit Preview mode, press [STOP].
Reference_e.book 154 ページ ２００３年７月１４日 月曜日 午後３時２５分