Roland Fantom-S Mouse User Manual


 
37
Playing in Patch Mode
Playing in Patch Mode
Switch
fig.02-26_50
For details on the setting, refer to
“Assigning a Parameter to a
Controller”
(p. 34).
Assignable switches are valid only when the keyboard part is
selected.
Switch 1/2 (Assignable Switch 1–2)
Specify the functions that will be controlled by the [ ]/[ ]
buttons.
Value
Transpose Down:
Lowers the key range in semitone steps
(up to 5 semitones lower).
Transpose Up:
Raises the key range in semitone steps
(up to 6 semitones higher).
Tap Tempo:
Tap tempo (a tempo specified by the interval at
which you press the button).
Mono/Poly:
Pressed to toggle between polyphonic (POLY)
and monophonic (MONO) play of a patch.
Portamento:
Portamento On/Off
Hold:
Hold play On/Off
MFX1–3 Sw:
Multi-effect 1–3 switch
Chorus Sw:
Chorus switch
Reverb Sw:
Reverb switch
Mastering Sw:
Mastering switch
Loop:
Loop play On/Off
Rhythm Start/Stop:
Rhythm pattern playback On/Off
Playing Percussion Instruments
In Patch mode, you can play percussion instruments from the
keyboard and pad by selecting a rhythm set. As the rhythm tone
assigned to each key and pad varies by the rhythm set selected, you
can play a wide range of percussion instruments.
Selecting a Rhythm Set
The Fantom-S has four rhythm set groups, including the User group,
Preset group and GM group, with 32 rhythm sets in the User group,
32 rhythm sets in Preset group, and 9 rhythm sets in GM group.
Rhythm sets can also be saved on a memory card. What’s more, you
can further expand your options by installing up to three optional
Wave Expansion Boards (four SRX series), enabling you to select
from a large selection of rhythm sets.
USER
This is the group inside the Fantom-S which can be rewritten.
rhythm sets you yourself create can be stored in this group. The
Fantom-S includes 32 preset rhythm sets.
PRST (Preset)
This is the group inside the Fantom-S which cannot be rewritten.
However, you can modify the settings of the currently selected
rhythm set, and then save the modified settings in User memory.
The Fantom-S contains 32 preset rhythm sets.
CARD (Memory Card)
This group lets you use patches stored on a memory card inserted in
the rear panel card slot. Since the data in this group can be rewritten,
you can use this group to store patches that you create.
GM (GM2)
This is an internal group of rhythm sets compatible with General
MIDI 2, a system of MIDI function specifications designed to
transcend differences between makers and types of devices; these
rhythm sets cannot be overwritten. Furthermore, settings of
currently selected rhythm sets from this group cannot be changed.
The Fantom-S includes nine preset rhythm sets.
XP-A–D (Wave Expansion Boards installed in
EXP-A–D Slots)
These groups are for when using rhythm sets from a Wave
Expansion Board installed in slots EXP A–D, and cannot be
rewritten. However, you can modify the settings of the currently
selected rhythm set, and then save the modified settings in User
memory and Memory card. The number of onboard rhythm sets
depends on the specific Wave Expansion Boards installed.
A Rhythm Set XP-A–D cannot be accessed if the Wave
Expansion Board (SRX series: sold separately) it belongs to has
not been installed.
Reference_e.book 37 ページ 2003年7月14日 月曜日 午後3時25分