Filter
Top Products
162
Editing Songs
Adjusting the Song’s Playback Time
(Time Fit)
This function calculates the playback time of a song or allows you to modify
the tempo track data so that the song will play back in a specified time.
fig.11-28_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 151)
Measure, For (Edit Range)
Measure the playback time, or check/modify the range of measures
that are to be adjusted. If you set “For” to “ALL,” all measures will
be specified.
Time H/M/S
The playback time will be displayed. From left to right, the time
display indicates “hours: minutes: seconds.”
Time Original H/M/S
The current playback time will be displayed.
Deleting Blank Measures (Truncate)
Copying or merging may sometimes create blank measures at the
beginning of a phrase track or pattern. Truncate deletes silent portions
from the beginning of the specified phrase track to the first note-on.
If other sequencer data (such as program changes or control
changes) is recorded between the beginning and the first note-on
of the specified phrase track, only the last data event of each type
will be placed before the note-on.
fig.11-29_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 151)
Track / Pattern (Source Track)
Specifies the phrase track or pattern from which blank measures will
be deleted.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Below the Track parameter is displayed the location of the beginning
of the specified track, and the position of the first note-on.
Editing Individual Items of
Sequencer Data (Micro Edit)
Micro Edit lets you edit individual items of sequencer data recorded
in a song, such as MIDI messages and tempo data.
Editing Sequencer Data
(Basic Procedure in the Microscope)
Access the Microscope screen when you want to view the sequencer
data recorded in a song. Each line indicates the location (measure-
beat-clock) at which the sequencer data is recorded, and the data
recorded at that location.
1.
Load the song that contains the sequencer data you want to
view/edit (p. 149).
2.
Press [EDIT].
The Microscope screen appears.
Press or to view sequencer data.
fig.11-30.e
3.
Press [6] to switch the screen.
Each time you press [6] you will switch between the two screens.
4.
Press [7 (Trk/Ch Select)] to move the cursor to “Track,” and
select the track or pattern whose sequencer data you want
to view/edit.
TRK 1–TRK 16:
The specified phrase track
TEMPO:
Tempo track
BEAT:
Beat track
PTN001–PTN100:
The specified pattern (pattern mode only)