Filter
Top Products
159
Editing Songs
Editing Songs
Magnify
Set this parameter if you wish to increase or decrease durations by a
specified ratio. When set to “100%,” no change is made. A value of
“101%” or higher increases the duration; values of “99%” or lower
decrease the duration. For example, to halve duration, set this
parameter to “50%.” To double durations, set this parameter to
“200%.”
Value:
0–200%
Range Min, Range Max
Specifies the range of note numbers for which duration will be
modified. For example, if you want to change the duration of notes
in the range of C3 to C4, set “Range Min” to “C3” and “Range Min”
to “C4.” You can also specify the key range by pressing keys on the
keyboard.
MIDI Channel
Specifies the MIDI channel(s) of notes for which duration will be
modified.
If you wish to modify the duration for notes of all MIDI channels, set
this parameter to ALL. When changing the duration for notes of a
specific MIDI channel only, select that MIDI channel using this
parameter.
Value:
ALL, 1–16
Combining Two Phrase Tracks or
Patterns into One (Merge)
The sequencer data of two phrase tracks or patterns will be
combined into one.
fig.11-23_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 151)
Src Track / Src Pattern (Source Track)
Specifies the phrase track or pattern that is to be merged. After the
Merge operation has been executed, no sequencer data will remain
in this track.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Dst Track / Pattern (Destination Track/Pattern)
Specifies the merge-destination phrase track or pattern. After the
Merge operation has been executed, the sequencer data will be
combined into this track.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Extracting and Moving a Part of
Sequencer Data (Extract)
This function extracts a specified sequencer data area from a phrase
track or pattern and moves it to the same Song position of another
phrase track or pattern. Additionally, just as with Standard MIDI
File Format 0, when sequencer data from multiple MIDI channels is
recorded on one track, you can also assign one MIDI channel to a
single phrase track.
fig.11-24_50
For details on the settings, refer to
“Basic Operation for Track
Editing”
(p. 151)
Src Track / Src Pattern (Source Track)
Specifies the phrase track or pattern from which the sequencer data
will be extracted. After Extract is executed, the selected sequencer
data no longer remains on this phrase track or pattern.
Value
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Measure, For (Edit Range)
Specifies the range of measures from which sequencer data will be
extracted. If you set “for” to “ALL,” all measures will be specified.
Dst Track / Pattern (Destination Track/Pattern)
Specifies the move-destination track or pattern.
Value
ALL:
According to its MIDI channel, the sequencer
data will be divided among phrase tracks 1–16.
TRK 1–TRK 16:
The specified phrase track
PTN001–PTN100:
The specified pattern
Extract Mode
Specifies whether you want to keep the sequencer data at the
destination.
Value
MIX:
The data at the destination will combine with the
extracted data.
REPLACE:
The data at the destination will be erased and replaced
by the extracted data.
If you select “REPLACE,” only the sequencer data on the MIDI
channel specified by the Channel parameter will be the object of
the operation. Sequencer data of all other MIDI channels will be
unaffected.
Reference_e.book 159 ページ ２００３年７月１４日 月曜日 午後３時２５分