Filter
Top Products
MuxOneNAND2G(KFM2G16Q2A-DEBx)
- 78 -
FLASH MEMORY
MuxOneNAND4G(KFN4G16Q2A-DEBx)
2.8.26 ECC Status Register FF00h (R)
This Read register shows the Error Correction Status. The MuxOneNAND can detect 1- or 2-bit errors and correct 1-bit errors. 3-bit or more
error detection and correction is not supported.
ECC can be performed on the NAND Flash main and spare memory areas. The ECC status register can also show the number of errors in a
sector as a result of an ECC check in during a load operation. ECC status bits are also updated during a boot loading operation.
ECC registers will be reset when another command is issued.
FF00h, default = 0000h
NOTE :
1) After Synchronous Block Burst Read operation, DQ[0] shows accmulated 1bit error.
Error Status
ECC Information[15:0]
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERm3 ERs3 ERm2 ERs2 ERm1 ERs1 ERm0
ERs0
1)
ERm, ERs ECC Status
00 No Error
01 1 bit error(correctable)
10 2 bit error (uncorrectable)
11 Reserved
Item Definition Description
ERm0
1st selected sector of
the main BufferRAM
Status of errors in the 1st selected sector of the main BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERm1
2nd selected sector of
the main BufferRAM
Status of errors in the 2nd selected sector of the main BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERm2
3rd selected sector of
the main BufferRAM
Status of errors in the 3rd selected sector of the main BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERm3
4th selected sector of
the main BufferRAM
Status of errors in the 4th selected sector of the main BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERs0
1st selected sector of
the spare BufferRAM
Status of errors in the 1st selected sector of the spare BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERs1
2nd selected sector of
the spare BufferRAM
Status of errors in the 2nd selected sector of the spare BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERs2
3rd selected sector of
the spare BufferRAM
Status of errors in the 3rd selected sector of the spare BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.
ERs3
4th selected sector of
the spare BufferRAM
Status of errors in the 4th selected sector of the spare BufferRAM
as a result of an ECC check during a load operation.
Also updated during a Bootload operation.