Filter
Top Products
1-24
Loading paper in the stand/MPD & 2000 sheet paper drawer
Upper paper tray:
The upper paper tray is equivalent to the multi purpose drawer. The method of loading paper and the paper that can be
used are the same as for the multi purpose drawer. Refer to the description of the multi purpose drawer (see page 1-21).
Lower paper tray:
The lower paper tray is a large capacity tray that holds 2,000 sheets of 8-1/2" x 11" or A4 paper (20 lbs. (80 g/m
2
)). Use
the following procedure to load paper in the large capacity tray.
NOTE
If the paper size or paper type is changed in either paper tray, the tray settings must be changed in custom settings. Refer
to
“Setting the paper size and type” on page 1-19.
LOADING PAPER
1
Pull out the large capacity tray.
Gently pull the tray out
until it stops.
2
Load paper onto the right and left paper
feed tables.
●
Load paper onto the
right paper feed table.
The right table holds
approximately 1,200
sheets.
●
Raise the paper guide
and load paper onto the
left paper feed table.
The left table holds ap-
proximately 800 sheets.
After loading paper, be
sure to return the paper
guide.
3
Gently push the large capacity paper tray
into the printer.
Push the tray firmly all the
way into the printer.
4
Set the paper type.
If you have changed the paper size from the AB
system to the inch system or vice versa, select
the relevant type referring to “Setting the paper
size and type” on page 1-19.
5
Loading paper in the stand/MPD & 2000
sheet paper drawer is now complete.
Specifications (stand/MPD & 2000 sheet paper drawer)
Name Stand/MPD & 2000 sheet paper drawer
Paper sizes/weight See specifications of paper trays on page 1-17.
Paper capacity Upper tray: 500 sheets (20 lbs. (80 g/m
2
)), Lower tray: 2,000 sheets (20 lbs. (80 g/m
2
))
(ordinary paper)
Dimensions 24-3/8" (W) x 26-5/32" (D) x 15-29/32" (H)
(619 mm (W) x 664 mm (D) x 404 mm (H))
Weight Approximately 75 lbs. or 34 kg