Filter
Top Products
AP-5131 Access Point Product Reference Guide
4-26
2. Configure the SNMP v1/v2c Trap Configuration field (if SNMP v1/v2c Traps are used) to
modify the following:
3. Configure the SNMP v3 Trap Configuration field (if SNMP v3 Traps are used) to modify
the following:
Add
Click
Add to create a new SNMP v1/v2c Trap Configuration entry.
Delete Click
Delete to remove a selected SNMP v1/v2c Trap
Configuration entry.
Destination IP
Specify a
numerical (non DNS name) destination IP address for
receiving the traps sent by the
AP-5131 SNMP agent.
Port Specify a destination User Datagram Protocol (UDP) port for
receiving traps. The default is 162.
Community Enter a community name specific to the SNMP-capable client that
receives the traps.
SNMP Version
Use the SNMP Version drop-down menu to specify v1 or v2.
Some SNMP clients support only SNMP v1 traps, while others
support SNMP v2 traps and possibly both, verify the correct traps
are in use with clients that support them.