Filter
Top Products
Command Line Interface Reference 8-185
AP5131>admin(system.fw-update)>update
Description:
Executes the AP-5131 firmware update over the WAN or LAN port using either ftp or tftp.
Syntax:
For information on updating AP-5131 device firmware using the applet (GUI), see Updating Device Firmware on page 4-41.
update <mode><iface> Defines the ftp ot tftp mode used to conduct the firmware update. Specifies whether the
update is executed over the AP-5131’s WAN, LAN1 or LAN2 interface <iface>.
NOTE The AP-5131 must complete the reboot process to successfully update the device firmware, regardless of
whether the reboot is conducted uing the GUI or CLI interfaces.