Filter
Top Products
AP-5131 Access Point Product Reference Guide
5-14
3. To add an Ethernet type, click the Add button.
The Add Ethernet Type screen displays. Use this screen to add one type filter option at a
time, for a list of up to 16 entries.
Packet types supported for the type filtering function include 16-bit DIX Ethernet types as
well as Symbol proprietary types. Select an Ethernet type from the drop down menu, or enter
the Ethernet type’s hexadecimal value. Consult with your System Administrator if unsure of
the implication of adding or omitting a type from the list for either LAN1 or LAN2.
4. To optionally delete a type filtering selection from the list, highlight the packet type and click
the Delete button.
5. Click Apply to save any changes to the LAN1 or LAN2 Ethernet Type Filter Configuration
screen. Navigating away from the screen without clicking Apply results in all changes to the
screens being lost.
6. Click Cancel to securely exit the LAN1 or LAN2 Ethernet Type Filter Configuration screen
without saving your changes.
7. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
5.2 Configuring WAN Settings
A Wide Area Network (WAN) is a widely dispersed telecommunications network. The AP-5131
includes one WAN port. The AP-5131 WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.
Use the WAN screen to set the WAN IP configuration and Point-to-Point Protocol over Ethernet
(PPPoE) parameters.