Symbol Technologies AP-5131 Network Router User Manual


 
System Configuration
4-7
3. Refer to the Applet Timeout field to set an HTTPS timeout interval.
4. Configure the Secure Shell field to set timeout values to reduce network inactivity.
5. Use the Admin Authentication buttons to specify the authentication server connection
method.
Applet HTTP (port 80) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the
AP-5131 configuration applet using a Web browser.
Applet HTTPS (port
443)
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the
AP-5131 configuration applet using a Secure Sockets Layer
(SSL) for encrypted HTTP sessions.
CLI TELNET (port 23)
Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the
AP-5131 CLI via the TELNET terminal emulation TCP/IP
protocol.
CLI SSH (port 22) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the
AP-5131 CLI using the SSH (Secure Shell) protocol.
SNMP (port 161) Select the LAN1, LAN2 and/or WAN checkboxes to enable access
to the
AP-5131 configuration settings from an SNMP-capable
client.
HTTP/S Timeout
Disables access to the AP-5131 if no data activity is detected over
Applet HTTPS (port 443) after the user defined interval. Default is
0 Mins.
Authentication
Timeout
Defines the maximum time (between 30 - 120 seconds) allowed for
SSH authentication to occur before executing a timeout. The
minimum permissible value is 30 seconds.
SSH Keepalive
Interval
The SSH Keepalive Interval defines a period (in seconds) after
which if no data has been received from a client, SSH sends a
message through the encrypted channel to request a response from
the client. The default is 0, and no messages will be sent to the
client until a non-zero value is set. Defining a Keepalive interval is
important, otherwise programs running on a server may never
notice if the other end of a connection is rebooted.
Local
The
AP-5131 verifies the authentication connection.