Filter
Top Products
Command Line Interface Reference 8-75
retry <number> Sets the maximum number of reauthentication
retries <retry> (1-99).
accounting mode <mode> Enable or disable Radius accounting.
server <ip> Set external Radius server IP address.
port <port> Set external Radius server port number.
secret <secret> Set external Radius server shared secret
password.
timeout <period> Defines MU timout period in seconds (1-255).
retry <number> Sets the maximum number of MU retries to
<retry> (1-10).
syslog <mode> Enable or disable syslog messages.
ip <ip> Defines syslog server IP address.
adv mu-quiet <time> Set the EAP MU/supplicant quiet period to
<time> seconds (1-65535).
mu-timeout <timeout> Sets the EAP MU/supplicant timeout in seconds
(1-255).
mu-tx <time> Sets the EAP MU/supplicant TX period <time> in
seconds (1-65535).
mu-retry <count> Sets the EAP maximum number of MU retries to
<count> (1-10).
svr-timeout <time> Sets the server timeout <time> in seconds (1-
255).
svr-retry <count> Sets the maximum number of server retries to
<count> (1-255).
Note: The WEP authentication mechanism saves
up to four different keys (one for each WLAN). It
is not requirement to set all keys, but you must
associate a WLAN with the same keys.
enc <idx> <type> Sets the encryption type to <type> (one of none,
wep40, wep104, keyguard, tkip, or ccmp) for
WLAN <idx>.