Filter
Top Products
AP-5131 Access Point Product Reference Guide
6-8
6. Click Apply to keep changes made within the New Security Policy screen (if any).
Configure encryption or authentication supported security policies by referring to the
following:
AP-5131 authentication:
• To create a security policy supporting Kerberos, see,
Configuring Kerberos Authentication on page 6-9.
• To define a security policy supporting 802.1x EAP, see
Configuring 802.1x EAP Authentication on page 6-11.
AP-5131 encryption:
• To create a security policy supporting WEP, see
Configuring WEP Encryption on page 6-16.
• To define a security policy supporting KeyGuard, see,
Configuring KeyGuard Encryption on page 6-18.
• To configure a security policy supporting WPA/TKIP, see
Configuring WPA Using TKIP on page 6-20.
• To create a security policy supporting WPA2/CCMP, see
Configuring WPA2-CCMP (802.11i) on page 6-22.
WEP 128 (104-bit key) Select the WEP 128 (104 bit key) button to display the WEP 128
Settings field within the New Security Policy screen. For specific
information on configuring WEP 128, see
Configuring WEP Encryption on page 6-16.
KeyGuard Select the KeyGuard button to display the KeyGuard Settings
field within the New Security Policy screen. For specific
information on configuring KeyGuard, see
Configuring KeyGuard Encryption on page 6-18.
WPA/TKIP Select the WPA/TKIP button to display the WPA/TKIP Settings
field within the New Security Policy screen. For specific
information on configuring WPA-TKIP, see
Configuring WPA Using TKIP on page 6-20.
WPA2/CCMP
(802.11i)
Select the WPA2/CCMP (802.11) button to display the WPA2/
CCMP Settings field within the New Security Policy screen. For
detailed information on configuring WPA2/CCMP, see
Configuring WPA2-CCMP (802.11i) on page 6-22.