Filter
Top Products
AP-5131 Access Point Product Reference Guide
B-10
B.2.1 Configuring a VPN Tunnel Between Two AP-5131s
The AP-5131 can connect to a non-AP device supporting IPSec, such as a Cisco VPN device - labeled
as "Device #2".
For this usage scenario, the following components are required:
• 2 AP-5131s
• 1 PC on each side of the AP-5131s LAN.
To configure a VPN tunnel between two AP-5131s:
1. Ensure the WAN ports are connected via the internet.
2. On AP-5131 #1, select WAN -> VPN from the main menu tree.
3. Click Add to add the tunnel to the list.
4. Enter a tunnel name (tunnel names do not need to match).
5. Enter the WAN port IP address of AP #1 for the Local WAN IP.
6. Within the Remote Subnet and Remote Subnet Mask fields, enter the LAN IP subnet and
mask of AP #2 /Device #2.
7. Enter the WAN port IP address of AP #2/ Device #2 for a Remote Gateway.