Filter
Top Products
AP-5131 Access Point Product Reference Guide
9-34
21. Now a QoS policy needs to be defined for the shipping and receiving mesh WLAN. The IT
Team still envisions little (if any) video or voice traffic within the shipping as the MUs within
primarily scan bar codes and upload data. This holds true for the QoS requirements for AP3
and AP4 as the required coverage area has grown, not the security, access permission or
QoS considerations. For more information, see how the team defined the AP1 and AP2 QoS
policy starting on step 25 within Trion’s Initial Deployment on page 9-18.
The WLAN configuration has now been set for both AP3 and AP4. The team now needs to
define the radio configurations for AP3 and AP4.
22. The IT team selects Network Configuration -> Wireless -> Radio Configuration from
the AP-5131 menu tree.
The Radio Configuration screen displays.
23. For both AP3 and AP4, the IT Team enables Radio 1 and defines the radio as a repeater
(enabling each radio as both a base and client bridge).
Both AP3 and AP4 are intended to pass along mesh network back data to AP1 and support
the 802. 11b/g MUs within the shipping yard.
24. The IT Team leaves each radio’s Max # Client Bridge setting at the default setting of 12.
This ensures as client bridges are added to the growing mesh network that they can be
accounted for.