Filter
Top Products
AP-5131 Access Point Product Reference Guide
7-8
5. Click the Clear LAN Stats button to reset each of the data collection counters to zero in
order to begin new data collections. The RX/TX Packets and RX/TX Bytes totals remain at
their present values and are not cleared.
6. Click the Logout button to securely exit the AP-5131 Symbol Access Point applet. There will
be a prompt confirming logout before the applet is closed.
TX Packets TX packets are data packets sent over the AP-5131 LAN port. The
displayed number is a cumulative total since the LAN connection
was last enabled or the
AP-5131 was last restarted. To begin a
new data collection, see Configuring System Settings on page 4-2.
TX Bytes TX bytes are bytes of information sent over the LAN port. The
displayed number is a cumulative total since the LAN Connection
was last enabled or the
AP-5131 was last restarted. To begin a
new data collection, see Configuring System Settings on page 4-2.
TX Errors TX errors include dropped data packets, buffer overruns, and carrier
errors on outbound traffic. The displayed number of TX errors is a
total of TX Dropped, TX Overruns and TX Carrier errors. Use this
information to re-assess AP location and transmit speed.
TX Dropped The TX Dropped field displays the number of data packets that fail
to get sent from the
AP-5131 LAN port.
TX Overruns TX overruns are buffer overruns on the LAN port. TX overruns occur
when packets are sent faster than the LAN connection can handle.
If TX overruns are excessive, consider reducing the data rate, for
more information, see Configuring the 802.11a or 802.11b/g Radio
on page 5-48.
TX Carrier The TX Carrier field displays the number of TCP/IP data carrier
errors.