Filter
Top Products
AP-5131 Access Point Product Reference Guide
4-4
3. Refer to the Factory Defaults field to restore either a full or partial default configuration.
Country The AP-5131 prompts the user for the correct country code after
the first login. A warning message also displays stating that an
incorrect country setting will lead to an illegal use of the AP-5131.
Use the pull-down menu to select the country of operation.
Selecting the correct country is extremely important. Each country
has its own regulatory restrictions concerning electromagnetic
emissions (channel range) and the maximum RF signal strength
transmitted. To ensure compliance with national and local laws, be
sure to set the Country field correctly.
If using the
AP-5131 configuration file, CLI or MIB to configure the
AP-5131’s country code, see Country Codes on page A-6.
AP-5131 Version The displayed number is the current version of the AP-5131 device
firmware. Use this information to determine if the AP is running the
most recent firmware available from Symbol. Use the Firmware
Update screen to keep the AP’s firmware up to date. For more
information, see Updating Device Firmware on page 4-41.
System Uptime Displays the current uptime of the
AP-5131 defined in the System
Name field. System Uptime is the cumulative time since the
AP-5131 was last rebooted or lost power.
Serial Number Displays the AP-5131 Media Access Control (MAC) address. The
AP-5131 MAC address is hard coded at the factory and cannot be
modified. The LAN and WAN port MAC addresses can be located
within the LAN and WAN Stats screens. For information on
locating the AP-5131 MAC addresses, see Viewing WAN Statistics
on page 7-2 and Viewing LAN Statistics on page 7-6.
CAUTION Restoring the AP-5131’s configuration back to default settings
changes the administrative password back to “symbol.” If restoring
the configuration back to default settings, be sure you change the
administrative password accordingly.
!