Filter
Top Products
AP-5131 Access Point Product Reference Guide8-74
Syntax:
create Defines the parameters of a security policy.
show Displays new or existing security policy
parameters.
set
sec-name
<name> Sets the name of the security policy.
auth <authtype> Sets the authentication type for WLAN <idx> to
<type> (none, eap, or kerberos).
Note: Kerberos parameters are only in affect if
"kerberos" is specified for the authentication
method (set auth <type>).
kerb realm <name> Sets the Kerberos realm.
server <sidx> <ip> Sets the Kerberos server <sidx> (1-primary, 2-
backup, or 3-remote) to KDC IP address.
port <sidx> <port> Sets the Kerberos port to <port> (KDC port) for
server <ksidx> (1-primary, 2-backup, or 3-remote).
Note: EAP parameters are only in affect if "eap"
is specified for the authentication method (set
auth <type>).
eap server <sidx> <ip> Sets the radius server (1-primary or as 2-
secondary) IP address <ip>.
port <sidx> <port> Sets the radius server <sidx> (1-primary or 2-
secondary) <port> (1-65535).
secret <sidx> <secret> Sets the EAP shared secret <secret> (1-63
characters) for server <sidx> (1-primary or 2-
secondary).
reauth mode <mode> Enables or disables EAP reauthentication.
period <time> Sets the reauthentication period <period> in
seconds (30-9999).