Filter
Top Products
AP-5131 Access Point Product Reference Guide8-158
8.4.4.2 System SNMP Traps Commands
AP5131>admin(system.snmp.traps)
Description:
Displays the SNMP traps submenu. The items available under this command are shown below.
show Shows SNMP trap parameters.
set Sets SNMP trap parameters.
add Adds SNMP trap entries.
delete Deletes SNMP trap entries.
list Lists SNMP trap entries.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.