Filter
Top Products
AP-5131 Access Point Product Reference Guide
9-20
3. The Trion IT department selects Network Configuration -> LAN from the AP-5131 menu
tree.
4. The Trion IT department verifies the LAN used to support the mesh network is enabled for
both AP1 and AP2, (by selecting the Enable checkbox).
5. The Trion IT department then selects Network Configuration -> LAN -> trion from the
AP-5131 menu tree.
NOTE In this fictional mesh network deployment for Trion Enterprises, AP1 and
AP2 should both have the AP-5131’s Ethernet Port mapped to the mesh
LAN. However, there are some scenarios when this is not necessary. For
example, when the Ethernet is not connected, or is being used for some
other purpose such as routing traffic to the WAN connection.