Filter
Top Products
Command Line Interface Reference 8-49
AP5131>admin(network.wan.vpn)> add
Description:
Adds a VPN tunnel entry.
Syntax:
Example:
admin(network.wan.vpn)>add 2 SJSharkey 209.235.44.31 206.107.22.46
255.255.255.224 206.107.22.1
If tunnel type is Manual, proper SPI values and Keys must be configured after
adding the tunnel
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page 6-34.
add <name> <LAN idx> <LWanIP> <RSubnetIP> <RSubnetMask <RGatewayIP>
Creates a tunnel <name> (1 to 13 characters) to gain access through local WAN IP <LWanIP> from the remote subnet
with address <RSubnetIP> and subnet mask <RSubnetMask> using the remote gateway <RGatewayIP>.