Filter
Top Products
Command Line Interface Reference 8-121
AP5131>admin(network.firewall)> show
Description:
Displays the AP-5131 firewall parameters.
Syntax:
Example:
admin(network.firewall)>show
Firewall Status : disable
NAT Timeout : 10 minutes
Configurable Firewall Filters:
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192 bytes
max mime headers : 16 headers
For information on configuring the Firewall options available to the AP-5131 using the applet (GUI), see
Configuring Firewall Settings on page 6-25.
show Shows all AP-5131’s firewall settings.