Filter
Top Products
Command Line Interface Reference 8-105
AP5131>admin(network.wireless.qos.edit)>
Descripton:
Edits the properties of an existing QoS policy.
Syntax:
For information on configuring the WLAN QoS options available to the AP-5131 using the applet (GUI), see
Setting the WLAN Quality of Service (QoS) Policy on page 5-34.
show Displays QoS policy parameters.
set qos-name <index> Sets the QoS name for the specified index entry.
vop <index> Enables or disables support (by index) for legacy VOIP devices.
mcast <mac> Defines primary and secondary Multicast MAC address.
wmm-qos <index> Enables or disables the QoS policy index specified.
param-set <set-name> Defines the data type used with the qos policy and mesh
network. When set to a value other then manual, editing the
access category values is not necessary. Options include; 11g-
default, 11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or
manual for advanced users).
cwmin <access
category>
<index> Defines Minimum Contention Window (CW-Min) for specified
access categoiry and index.
cwmax <access
category>
<index> Defines Maximum Contention Window (CW-Max) for specified
access categoiry and index.
aifsn <access
category>
<index> Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified
access categoiry and index.
txops <access
category>
<index> Configures Opportunity to Transmit Time (TXOPs Time) for
specified access categoiry and index.
default <index> Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
change Completes the policy edit and exits the session.
.. Cancels the changes and exits.