Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
Mode 2 Sets to Mode 2.
Glows blue (Power ON) / Alternately flashes green and
orange (Standby) / Alternately flashes green and blue
(Power OFF/Hibernation)
Mode 3 Sets to Mode 3.
Flashes in order of green, orange and blue (Power ON) /
Glows yellow (Standby) / Glows orange (Power OFF
/Hibernation)
(h) Language During Bootup
This option selects the language during bootup. This message appears only on
the model for TCL (Canada).
English The message is displayed in English. (Default)
French The message is displayed in French.
8. Configuration
This option lets you set the device configuration.
All Devices BIOS sets all devices.
Setup by OS Initializes devices, which is needed to load an operating
system. Operating system initializes other devices.
NOTE: When using installed OS, selecting “Set by OS” is recommended. But when
executing test programs, select “ALL Devices”.
9. Drives I/O
This option displays the address and interrupt level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
Built-in HDD
This cannot be changed.
CD-ROM
This cannot be changed. This is not displayed when a drive
is not built-in.
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
QOSMIO F10 Maintenance Manual (960-498) 3-101