Filter
Top Products
4.23 LCD unit/FL inverter 4 Replacement Procedures
9. Remove the following screws fixing the LCD unit.
• M2x4Z SUPER THIN HEAD screw x4
10. With the bottom edge of the LCD unit on the display cover, lift only the top edge of
the LCD unit. After peeling off the aluminum tape, disconnect the LCD harness
from the connector on the back of the LCD unit. Remove the LCD unit.
M2x4Z SUPER THIN HEAD
LCD unit
Aluminum tape
(Fit the right side to
the connector of
the cable and the
top to the
connector on the
board.)
LCD harness
Figure 4-41 Removing the LCD unit
4-60 QOSMIO F10 Maintenance Manual (960-498)