Filter
Top Products
4 Replacement Procedures 4.23 LCD unit/FL inverter
4. Remove the following screw fixing the FL inverter.
• M2x4Z SUPER THIN HEAD screw x1
5. (for model with wireless LAN or Bluetooth)
Pull out one insulator and peel off the other one adhered to the FL inverter.
6. Disconnect the LCD harnesses from the connectors CN1 and CN2 on the FL
inverter.
7. Disconnect the HV harnesses from the connectors CN3 and CN4 on the FL inverter.
8. Remove the FL inverter while peeling off the double-sided tape.
CN2
CN1
M2x4Z SUPER THIN HEAD
Insulato
r
LCD harnesses
Insulator (adhered)
Double-sided tape
FL inverte
r
HV harnesses
Figure 4-40 Removing the FL inverter
QOSMIO F10 Maintenance Manual (960-498) 4-59