Toshiba 960-498 Personal Computer User Manual


 
4.20 Touch pad 4 Replacement Procedures
Installing the touch pad
The following describes the procedure for installing the touch pad (See Figure 4-36).
NOTE: Do not reuse the touch pad so that it can not be used after peeling off from the
computer. Be sure to stick a new touch pad.
1. Stick the touch pad and secure it with the following screws.
M2.5×2.8B FLAT BIND screw x2
2. Install the touch pad plate and secure it with the following screws.
M2.5×2.8B FLAT BIND screw x4
3. Connect the touch pad flat cable to the connector on the touch pad and secure it with
a glass tape.
4-54 QOSMIO F10 Maintenance Manual (960-498)