Filter
Top Products
4 Replacement Procedures 4.22 Microphone
4.22 Microphone
Removing the microphone
The following describes the procedure for removing the microphone (See Figure 4-38).
1. Remove the following screw to remove the microphone hold guide from the base
assembly.
• M2×4Z BIND screw x1
2. Detach the microphone from the microphone hold guide.
3. Detach the microphone cover from the microphone.
M2x4Z BIND
Microphone
Microphone cover
Microphone Hold Guide
Figure 4-38 Removing the microphone
Installing the microphone
The following describes the procedure for installing the microphone (See Figure 4-38).
1. Install the microphone cover on the microphone.
2. Install the microphone to the microphone hold guide.
3. Install the microphone hold guide along the guide and secure it with the following
screw.
• M2×4Z BIND screw x1
QOSMIO F10 Maintenance Manual (960-498) 4-57