4.8 Display assembly 4 Replacement Procedures
5. Disconnect the LCD harness from the connector PJ5600 on the system board.
6. Unlock the connector CN3201 and disconnect the touch pad cable from the
connector on the system board.
7. Unlock the connector CN9550 and disconnect the SJ board flat cable from the
connector on the sound board.
8. Take out the wireless LAN antenna cables under the insulators and pull out it from
the upper side of the slot.
PJ5600
LCD harness
PJ3201
SJ board flat cable
Upper side of the slot
PJ9550
Insulator
Touch pad cable
Figure 4-16 Removing the cables
4-28 QOSMIO F10 Maintenance Manual (960-498)