Filter
Top Products
4 Replacement Procedures 4.24 Wireless antennas/ LCD harness
4.24 Wireless antennas/ LCD harness
4.24.1 Wireless antennas
Removing the wireless antennas
The following describes the procedure for removing the wireless antennas (See Figure 4-44
and 4-44).
1. Make sure the wireless LAN antenna cables are pulled on the middle frame. (Refer to
4.8 Display assembly.)
2. Turn up the insulators and pull out the bluetooth antenna cable from the guide of
middle frame.
Wireless LAN antenna cables
Insulators
Insulator
Bluetooth antenna cable
Figure 4-43 Removing the bluetooth antenna cables
QOSMIO F10 Maintenance Manual (960-498) 4-63