Filter
Top Products
4.24 Wireless antennas/ LCD harness 4 Replacement Procedures
2. Remove the following screw securing the LCD harness holder and remove the LCD
harness holder (middle frame side).
• M2.5×2.8B FLAT BIND screw x1
3. Remove the LCD harness from the guide.
M2.5x2.8B FLAT BIND
LCD harness holder
LCD harness
Figure 4-46 Removing the LCD harness holder (middle frame side)
Installing the LCD harness
The following describes the procedure for installing the LCD harness (See Figure 4-45 and 4-
46).
1. Arrange the LCD harness to the guide.
2. Install the LCD harness holder (middle frame side) and secure it with the following
screw.
• M2.5×2.8B FLAT BIND screw x1
3. Attach the LCD harness holder (display cover side) and secure it with the following
screw.
• M2.5×4B FLAT BIND screw x1
4-66 QOSMIO F10 Maintenance Manual (960-498)