Filter
Top Products
4.2 Battery pack/PC card/Bridge Media 4 Replacement Procedures
4.2.2 PC card
Removing the PC card
The following describes the procedure for removing the PC card (See Figure 4-2).
CAUTION: Insert or remove the PC card in accordance with any instructions in the PC
card manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press once more the
eject button to eject the PC card.
2. Grasp the PC card and remove it.
NOTE: If the PC card is not inserted all the way, the eject button may not pop out. Be
sure to push the PC card firmly and press the eject button again.
Eject button
PC card
Figure 4-2 Removing the PC card
Installing the PC card
The following describes the procedure for inserting a PC card (See Figure 4-2).
1. Make sure the eject button does not stick out.
2. Insert the PC card and press it until it is securely connected.
4-10 QOSMIO F10 Maintenance Manual (960-498)