Filter
Top Products
4.17 PC card cover 4 Replacement Procedures
4.17 PC card cover
Removing the PC card cover
The following describes the procedure for removing the PC card cover (See Figure 4-32).
1. Remove the following screws securing the PC card cover.
• M2×3Z BIND screw x2
2. Open the PC card cover toward the outside to unlatch it from hooks and pull up the
PC card cover.
NOTE: Since the PC card cover is deformed when removing it, you cannot reuse it.
Hook
PC card cover
M2x3Z BIND
Figure 4-32 Removing the PC card cover
Installing the PC card cover
The following describes the procedure for installing the PC card cover (See Figure 4-32).
1. Install the PC card cover while locking the hooks.
2. Secure the PC card cover with the following screws.
• M2×3Z BIND screw x2
4-48 QOSMIO F10 Maintenance Manual (960-498)