Filter
Top Products
Interface Menu
Chapter 3: Using the Control Panel
❖
3-53
Figure 3.15 Ethernet Menu options showing factory settings
Option
Setting
Description
Port Timeout
5-999 secs (
30*
) Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
Port Timeout
works in conjunction with
Auto Job
End
(page 3-54).
See
Appendix C: I/O Port Polling
for more
information.
System Language
PCL*
PostScript
†
†
Appears only when the
PostScript option is
installed.
Page description language (PDL) the printer will use
for print jobs coming through the Ethernet port.
When
Lang. Sensing
(page 3-53) is
On
,
System
Language
is used only when the printer cannot
detect the PDL used in the incoming print job.
Lang. Sensing
Off
On*
Automatic recognition of the page description
language (PDL) used in an incoming print job.
When
On
, if the Ethernet port receives print jobs of
different PDLs—such as a PostScript print job followed
by a PCL print job—it can automatically sense which
PDL the print job is using. It does this by sampling the
incoming data stream, then switching to the
perceived language for that job or to the
System
Language
setting if it fails to sense the language.
When
On
, if
State Saving
(page 3-28) in the PCL
Menu or
State Saving
(page 3-37) in the PostScript
Menu is also
On
, the permanently downloaded fonts
and macros are saved in memory, eliminating the time
to download them again when switching occurs
between PDLs.
WUG-CH03 Page 53 Black,Red,Cyan Tuesday, March 21, 1995 4:54 PM