Filter
Top Products
Displayed Control Panel Messages
Chapter 7: Troubleshooting
❖
7-23
Warning 400/A3
This message appears in PCL when the printer has changed resolution to 400 or
page protection to A3; appears in PostScript when the page size is A3 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Warning 400/A4
This message appears in PCL when the printer has changed resolution to 400 or
page protection to A4; appears in PostScript when the page size is A4 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Warning 400/A5
This message appears in PCL when the printer has changed resolution to 400 or
page protection to A5; appears in PostScript when the page size is A5 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Warning 400/B4
This message appears in PCL when the printer has changed resolution to 400 or
page protection to B4; appears in PostScript when the page size is B4 and the
printer has changed resolution to 400.
This is a transient warning to advise that, due to insufficient memory to print with
the requested settings, either the resolution or page protection has been changed.
The message clears when the next job starts.
ACTION: None
Figure 7.2 Control Panel messages
(continued)
Message
Description/Action
WUG-CH07 Page 23 Black,Red,Cyan Wednesday, January 25, 1995 3:45 PM