Filter
Top Products
Installing a SIMM
Chapter 5: Adding Printer Options
❖
5-7
5
With your fingers,
loosen the
thumbscrews.
Thumbscrews are not
removable.
SIMMs and controller boards are sensitive to static electricity.
Before installing a SIMM, discharge static electricity from
your body by touching something metal, such as the metal
back plate on any device plugged into a grounded power
source. If you walk around before finishing the installation,
again discharge any static electricity.
Never remove the printer controller board while the printer is
plugged in.
!
Caution
WUG-CH05 Page 7 Black,Red,Cyan Sunday, January 22, 1995 8:32 PM